HEPA Source Capture • Serving All of DFW
Dust Free Tile Removal in DFW
Dust free tile removal that captures silica at the tool — not after it's already in your air. Tile, stone, and thinset taken down to a clean, install-ready slab.
What Dust Free Tile Removal Actually Means
Every tile demo creates dust. The question is where that dust ends up. With traditional demolition, it ends up in your air, your furniture, your cabinets, and your HVAC returns — and you find it on shelves for months. Dust free tile removal flips that: HEPA-filtered vacuum shrouds mount directly to the chipping hammers and grinders, so the silica is pulled off the bit at the moment the tile breaks.
We'll be straight with you: no demolition is literally 100% dust free. What source capture does is remove the vast majority of airborne silica before it can spread — which is the difference between a job site and a livable home.
Dust Free vs. Traditional Tile Demo
- Where the dust goes. Captured at the tool vs. distributed through the whole house.
- Your HVAC. Untouched vs. loaded with fine silica that recirculates for months.
- Cleanup. A final HEPA pass vs. weeks of wiping down every surface you own.
- Living in the home. Usually fine vs. often not.
- Cost. Roughly $5–$8/sq ft in the DFW market vs. $2–$4/sq ft — the gap is the cleanup you'd otherwise do yourself.
What We Remove
- Ceramic and porcelain tile — floors, walls, showers, backsplashes
- Natural stone — travertine, marble, granite, slate
- Thinset, mortar bed, and underlayment down to a flat slab
- Stone countertops and fireplace surrounds
- Tile over wood subfloor as well as slab-on-grade
How the Process Works
1. Free on-site estimate. We measure, identify the substrate, and flag anything unusual — radiant heat, post-tensioned slab, asbestos-era mastic. Written quote, usually same day.
2. Smart protection. We pad adjacent flooring and cabinetry and stage clean pathways to the truck. We don't wrap your home in plastic or seal your HVAC returns by default — capture at the tool is what keeps the house clean. On the rare job that genuinely calls for it, containment goes up as a backup.
3. Dust free removal. HEPA-shrouded chipping hammers and edge grinders pull silica off the tile as it breaks.
4. Thinset grind. Diamond-cup grinders take the slab flat and install-ready — no scope creep handed to your flooring installer.
5. Haul-off and final pass. Debris bagged and removed same day, final HEPA vacuum, walk-through with you before we leave.
Why It Matters More in DFW
Most North Texas homes are slab-on-grade with floor-level HVAC returns sitting inches from where the demo happens. That's the single fastest way for silica dust to get into a duct system and stay there. Our entire process is built around never letting the dust reach that return in the first place — which is why homeowners, designers, and GCs across Fort Worth, Dallas, Southlake, Plano, Frisco, and the rest of the metroplex call us before the remodel starts, not after the mess.
Dust Free Tile Removal FAQ
- What is dust free tile removal?
- Dust free tile removal is tile demolition performed with HEPA-filtered vacuum shrouds attached directly to the chipping hammers and grinders. Instead of letting silica dust go airborne and then trying to clean it up, the dust is captured at the point of impact — before it can travel through your home or into your HVAC system.
- Is dust free tile removal actually dust free?
- No demolition method is literally 100% dust free, and any company that promises that is overselling. What our HEPA source-capture system does is capture the vast majority of silica and fine particulate at the tool. The practical difference from traditional demo is dramatic — most homeowners are surprised how clean the space looks when we finish.
- How is dust free tile removal different from traditional tile demo?
- Traditional demo breaks tile with an uncontrolled hammer and lets the dust settle everywhere — furniture, cabinets, air ducts, and rooms nowhere near the job. Dust free removal captures that dust as it's created. You get a cleaner home, better indoor air quality, far less post-demo cleanup, and no weeks of fine grit reappearing on surfaces.
- Do I have to move out during dust free tile removal?
- In nearly every case, no. Because dust is captured at the tool rather than after the fact, the rest of the home stays livable. We don't drape your house in plastic or shut down your HVAC as a default — on the rare job that genuinely calls for it, we add containment as a backup.
- Does dust free tile removal include the thinset?
- Yes. Removing the tile is only half the job — the thinset and mortar bed underneath have to come off too, and that's the dustiest step of all. We grind the slab flat with HEPA capture and leave it install-ready for tile, LVP, hardwood, or polished concrete.
- How much does dust free tile removal cost in DFW?
- Dust free tile removal in the DFW market generally runs in the $5–$8 per square foot range depending on square footage, substrate, thinset type, and access — versus roughly $2–$4 per square foot for traditional demo that leaves you with the cleanup. We provide free written estimates, usually within one business day.
- What surfaces can you remove dust free?
- Ceramic and porcelain tile, natural stone (travertine, marble, granite, slate), mortar beds, thinset, stone countertops, fireplace surrounds, backsplashes, and shower tile — on both concrete slab and wood subfloor.
- Do you offer dust free tile removal across the DFW metroplex?
- Yes — Fort Worth, Dallas, Plano, Frisco, McKinney, Arlington, Irving, Southlake, Grapevine, Colleyville, Keller, Flower Mound, North Richland Hills, Bedford, Westlake, and the surrounding communities.
Want tile gone without the dust?
Free estimates anywhere in the DFW metroplex.